Naturkind Lux Evo, Operating And Cleaning Instructions

Page: 53 / 96

53
The rear wheels can be removed with the axle
pins remaining mounted to the wheels.
To do so, proceed as follows:
1. At the back of the rear axle, there is a release
button (21) for the wheel axle on each side.
Push this button toward the rear wheel.
2. Afterwards, pull the wheel and the axle out.
3.16 Removing and mounting the back wheels
The back wheels with the axle pins attached
thereto are mounted as follows:
1. Place the rear wheel with the wheel axle
first on the rear axle of the stroller, until it
audibly snaps into place.
You have the option to remove the rear wheels in a way that the wheel axles remain mounted
in the rear axle of the stroller. The process of removing and mounting depends on the rear wheel
design, as described below.
WARNING! After mounting is completed, make sure that the wheels have been firmly
mounted. In order for the wheel to run smoothly, it needs to feature axle clearance