https://www.naturewater.eu
Item 50808 and others
Page 9
09 2021
-1
1
Supply
2
Flush
3
Full
4
Water lack
5
Overhaul
6
Strong washing
•
If the system is turned on, it flushes for 30 s, the display being as
(2).
•
After having been rinsed, pure water is produced, the display being as
(1).
•
When the pressure tank is full, the system stops, the display being as
(3).
•
A warning buzzer will be shown if the water supply lacks or the water supply pressure is too low,
the display being as
(4).
•
After 2 h of pure water production, there is again a 30 s rinse.
•
In the event of the system working for an unusually long time, it is automatically switched off, in
which case a warning buzzer is activated, the display being as
(5).
•
If you press the button
(6)
for strong flus
hing (“Strong Washing”), the system is rinsed for 30 s.
RO controlbox
Pump
Flush
Full
Strong washing
No water
Change
1. Digit diode
(1):
two indicator options: “E” = control beeps, “P” = control is silent. The function
can be changed by pressing for 2 s
the “STRONG WASHING” button
(6).
2. The digit diodes
(2), (3), (4)
show the TDS value. If the system flushes, the digit diodes
(3),
(4)
show the remaining seconds for rinsing
3. The digit diode
(5)
shows the system operating state. The explanation can be found on the right
controller side.
4. Press the button
(6)
to flush the system.
