7
Assembly Instructions
PREPARING THE WASTE RECEPTACLE
1. Remove Carbon Filter from plastic sleeve. Peel off paper
strip to expose the adhesive. Place filter adhesive side
down in square-shaped insert in the center of the Waste
Receptacle Lid.
(Figure A)
2. Close Waste Receptacle Compartment Cover (do not
latch the tabs on the sides).
3. Slide Waste Receptacle into place, using the plastic
channels as a guide for the Waste Receptacle Lid.
(Figure B)
4. Slide in until locking tab on the Waste Receptacle
Lid engages the notch on the Waste Receptacle
Compartment Cover.
(Figure C)
FILLING LITTER TRAY
CAUTION: Do not use any form of non-clumping litter,
crystal or pearl-like litters in your Nature’s Miracle
®
Self-Cleaning Litter Box.
1. Fill the Litter Tray so the litter level is between the MIN
and MAX fill lines located on either side of the Litter
Tray.
(Figure D)
TIP: For optimal performance, continue to replace the
litter to reach the Min and Max line as waste is being
removed.
2. Use the Litter Scoop & Rake Cleaner to evenly distribute
the litter in the Litter Tray.
CAUTION: Do not overfill or underfill unit or it will not
operate properly or effectively.
C
D
A
B
C