IMNL
-
002.190704
© Ecoflo Wastewater Management Pty Ltd
Page 8
Option 2
Option 1
PVC pipe components, except the push on cap at the base of the
‘
T
’
piece (i.e. the Moisture
Trap), should be glued together using Plumbers PVC glue.
Connect the supplied Sewer Vent Cap to the top of the vent pipe,
and then the bottom of the vent pipe into the moisture trap.
Install the 100mm PVC pipe as per Option 1 or Option 2 (pictured above). If possible, Option 1
is far better for ventilation as the two 45 degree elbows in Option 2 can slow the air flow. Use
pipe clips (not provided) to secure the 100mm pipe to the outside wall.
Once the toilet is permanently
connected to the
‘
T
’
piece you
may attach the fibreglass toilet
shell to the floor with the self
-
tapping screws and nylon
washers (supplied) and / or a
sealant (not supplied).
Pre
-
Drill Clearance Holes in the Shell floor; so the screws do not
stress the fibreglass shell.
