NATURE & DECOUVERTES 15223500, Manual

Page: 9 / 27

OPERATION
CHARGING THE BATTERY PACK
CIBLÉ
Press to keep the massage function
in one area.
CHALEUR DOUCE
Press to activate the heat function.
DOS COMPLET
Press to get the full back massage.
ON/OFF
Press to turn the device on and off.
Indicateur de charge
Green blinking light when battery is low
(below 20%).
Green light when battery is running.
Red blinking light when in charge.
Red light when fully charged.
Press the ON/OFF button to start the massage.
Press the CHALEUR DOUCE button to activate the heat function. The massage nodes light up in red when the heat is activated.
Press the CIBLÉ button to fix the massage function in one area.
Press the DOS COMPLET button to get a full back massage.
Press the ON/OFF button again to stop the device completely.
Fully charge the massager before first use. The massager must be charged prior to initial use if the device has not been used for a
long period. When battery is completely out of power, please allow it to be charged for at least 30 minutes before activating the
unit again.
To charge the battery:
1. Place the back massage cushion on a chair or other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the charging adapter into an outlet.
4. Indicator light:
While charging, the indicator light will turn red and blink.
Important
When fully charged, the indicator light will keep red and stop blinking.
It takes around 2.5 hours to fully charge the battery.
When fully charged, the massage cushion can run for around 80 minutes.
When the battery is low (below 20%), the indicator light will turn green and blink.
When the battery is over 20%, the indicator light will keep green.
Cushion side
Adaptor side
8