Native Instruments traktor kontrol s5 Manual Download

Page: 199 / 211

Device Monitor Section

This section displays information about the audio interface's processing status and your sys-
tem's output latency.

Processing State

: The processing state monitor provides feedback on the current status of the

device. There are three possible status messages:

▪

Idle

: controller is connected, but no audio data is being streamed.

▪

Streaming

: driver is working and processing audio data.

▪

Panic

: driver stopped streaming. Too many USB I/O errors occurred in the interface com-

munication.

Output Latency

: displays your system s output latency in milliseconds.

Please note, when running external sources like turntables or microphones through
TRAKTOR, an additional input latency will occur.

7.2.3

Diagnostics Panel

The

Diagnostics

page allows you to monitor the controller s performance and to detect errors.

This information can be helpful to see the results of Process Buffer value adjustments and may
help troubleshooting in case you need to contact our technical support.

The S5 Audio Interface and Control Panel

Settings on Windows: The Control Panel

TRAKTOR KONTROL S5 - Manual - 199

Summary of Contents for traktor kontrol s5




















































































































































































































Search results

Summary of Contents for traktor kontrol s5

Reviews:

Related manuals for traktor kontrol s5

Brands by name

Popular brands

Native Instruments traktor kontrol s5, Manual

Search results

Summary of Contents for traktor kontrol s5

Reviews:

Related manuals for traktor kontrol s5

Brands by name

Popular brands