Native Instruments traktor kontrol s5 Page 195 Manual Download

Page: 195 / 211

On State Brightness

: sets the brightness level for engaged buttons and pads.

Dim State Percentage

: sets the brightness level for inactive buttons and pads.

6.6

Stem Control

In the Stem Control area you can define the Stem Deck behavior.

▪

Stem Select

: This option defines the behaviour of the Stem Selectors (pads on Stem Deck).

By default the Stem Selectors behavior is

Toggle

. When a Stem Selector is pressed the

Stem Part stays selected. When the Stem Selectors behavior is

Hold

the Stem Part(s) is

selected as long as you keep the Stem Selector(s) depressed.

▪

Stem Loading

: By enabling

Reset Filter + Volume when loading Stem Track

the Stem

Parts volumes will reset to maximum position and Filter adjustments will go back to center
position (0 %) when a new Stem File is loaded.

Preferences Pane in TRAKTOR

Stem Control

TRAKTOR KONTROL S5 - Manual - 195

Summary of Contents for traktor kontrol s5




















































































































































































































Search results

Summary of Contents for traktor kontrol s5

Reviews:

Related manuals for traktor kontrol s5

Brands by name

Popular brands

Native Instruments traktor kontrol s5, Manual

Search results

Summary of Contents for traktor kontrol s5

Reviews:

Related manuals for traktor kontrol s5

Brands by name

Popular brands