To assign a Mixer channel to the right crossfader side:
•
Set the crossfader assign selector for the corresponding Mixer channel to the right.
Unassigning Mixer Channels
To unassign a Mixer channel from the crossfader:
•
Set the crossfader assign selector for the corresponding Mixer channel to the center position.
7.3.1. Setting the Crossfader Curve
You can determine the fading behavior of the crossfader with the crossfader curve selector on the
front panel. You can set it to the positions constant, smooth, or sharp.
•
Constant
: With this setting, moving the crossfader allows the levels of the Mixer channel sig-
nals to be raised and lowered constantly.
•
Smooth
: With this setting, moving the crossfader enables the levels of the Mixer channel sig-
nals to be raised and lowered smoothly.
•
Sharp
: With this setting, moving the crossfader lets the level of the other Mixer channel signal
immediately raise to full volume. Both signals are audible in full volume when the crossfader is
placed at any position between the crossfader ends.
If you want the crossfader to use the constant curve:
•
Set the crossfader curve selector to the left.
If you want the crossfader to use the smooth curve:
Tutorials
44
Summary of Contents for TRAKTOR KONTROL S4
Page 1: ......
