Native Instruments Studio Drummer, User Manual

Page: 21 / 41

Solid Bus Comp
Solid B-Compression effect
Also available as a fully-fledged product in its own right, this virtual reproduction of a leg­
endary compressor adds presence and drive to your drums without blurring the detail.
▪
The ATTACK knob adjusts the amount of time in milliseconds that it takes for the com­
pressor to reach the ratio after the input signal exceeds the threshold level.
▪
The RELEASE knob adjusts the amount of time in milliseconds that the compressor will
take to stop affecting the sound after the input signal falls below the threshold.
▪
The THRESHOLD knob adjusts the level in dB that the input signal must exceed before
the compressor starts affecting the sound.
▪
The RATIO knob controls the amount of compression expressed as a ratio of “input lev­
el” to “output level change”. The higher the RATIO knob is set, the more the output
level will be reduced as the sound goes beyond the threshold.
▪
The MIX knob allows you to add the dry signal to the mix as well, for a parallel com­
pression sound.
▪
The MAKEUP knob allows you to increase the overall output level of the compressed
sound.
▪
The OUTPUT knob on the right side adjusts the overall output level.
The Performance View
Mixer Page
STUDIO DRUMMER - Manual - 21