KORE 2 – 10
3.8.4 Cabinet Saturator
The C
aBinet
S
aturator
acts as an overdrive unit with the distinct sound of
a distorted speaker cabinet. With its flexible resonant filter section it can
produce a wide range of interesting overdrive and distortion effects, be
they subtle or harsh.
Label
Function
Range
Unit
Mix
Controls the balance between the dry, unprocessed signal (at the left) and the wet,
processed signal (at the right).
0..100
%
Drive
This is the gain control for the input signal. Turn up to get more overdrive.
0..60
dB
Hipass/Lopass Cutoff
The cutoff frequency of the high- and low-pass filters, respectively. Frequencies
above/below the cutoff will be attenuated.
25..8000
80..25000
Hz
Hipass/Lopass Reso
Sets the sharpness of the filter’s response peak. At higher values the filter slope
becomes steeper and the cutoff frequency more accentuated.
0..100
%
Tilt
Controls two inverted shelving EQs before and after the saturation stage. Turning
to the left amounts in more saturation at high frequencies. Turning to the right
leads to more saturation at low frequencies.
-60..+60
dB
Volume
Output volume of the saturated signal.
-8..0
dB
