The
GATE RESET
function, mapped to Button 4 of the Control section lets you reset the GATE
parameter to its default value of 100% at any time.
To display the set value of the
GATE
parameter, tap Knob 8.
14.8 Setting the Advanced Parameters
The
ADVANCED
parameters
Retrigger
,
Repeat
,
Offset
, and
Inversion
allow you to explore alter-
native versions of the same arpeggiator sequence.
The
ADVANCED
parameters
Retrigger
,
Repeat
,
Offset
, and
Inversion
.
14.8.1 Advanced Retrigger
The first
ADVANCED
parameter,
Retrigger
, is only available in
Arp
mode. On the keyboard, it is
mapped to Knob 1 of the Control section when
PAGE
2 of
ARP
EDIT
mode is selected. Retrig-
ger sets a number of steps in the arpeggiator sequence after which the sequence restarts its
cycle, regardless of the number of pitches in the sequence.
For example:
▪
If the arpeggiator sequence consists of a 5 note cycle (1 - 2 - 3 - 4 - 5) and
Retrigger
is set
to
3
, the Arpeggiator output is 1 - 2 - 3 - repeat.
▪
If the arpeggiator sequence consists of a 5 note cycle (1 - 2 - 3 - 4 - 5) and
Retrigger
is set
to
8
, the Arpeggiator output is 1 - 2 - 3 - 4 - 5 - 1 - 2 - 3 - repeat.
Rests in a
Sequence
are treated as steps:
Playing and Editing the Arpeggiator
Setting the Advanced Parameters
KOMPLETE KONTROL - Manual - 202
Summary of Contents for KOMPLETE KONTROL S49
Page 1: ...MANUAL ...
