Native Instruments komplete kontrol s series, User Manual

Page: 175 / 198

14.7.2 Advanced Repeat
The second ADVANCED parameter, Repeat , is only available in Arp mode. On the keyboard, it
is mapped to Knob 2 of the Control section when PAGE 2 of ARP EDIT mode is selected. Re-
peat sets a number by which each step in the arpeggiator sequence is repeated.
For example:
▪
If the arpeggiator sequence consists of a 3 note cycle (1 - 2 - 3) and Repeat is set to 3 , the
Arpeggiator output is 1 - 1 - 1 - 2 - 2 - 2 - 3 - 3 - 3 - repeat.
14.7.3 Advanced Offset
The third ADVANCED parameter, Offset , is only available in Arp mode. On the keyboard, it is
mapped to Knob 3 of the Control section when PAGE 2 of ARP EDIT mode is selected. Offset
sets a number by which the steps in the arpeggiator sequence are shifted in the cycle.
For example:
▪
If the arpeggiator sequence consists of a 5 note cycle (1 - 2 - 3 - 4 - 5) and Offset is set to
0 , the Arpeggiator output is 1 - 2 - 3 - 4 - 5 - repeat.
▪
If the arpeggiator sequence consists of a 5 note cycle (1 - 2 - 3 - 4 - 5) and Offset is set to
+1 , the Arpeggiator output is 2 - 3 - 4 - 5 - 1 - repeat.
▪
If the arpeggiator sequence consists of a 5 note cycle (1 - 2 - 3 - 4 - 5) and Offset is set to
-1 , the Arpeggiator output is 5 - 1 - 2 - 3 - 4 - repeat.
14.7.4 Advanced Inversion
The fourth ADVANCED parameter, Inversion , is only available in Arp mode. On the keyboard, it
is mapped to Knob 4 of the Control section when PAGE 2 of ARP EDIT mode is selected. In-
version adds inverted alternations of the arpeggiator sequence to the cycle.
For example:
▪
If the arpeggiator sequence consists of a 3 note cycle (1 - 2 - 3), Type is set to Up , and
Inversion is set to 0 , the Arpeggiator output is 1 - 2 - 3 - repeat.
▪
If the arpeggiator sequence consists of a 3 note cycle (1 - 2 - 3), Type is set to Up , and
Inversion is set to 1 , the Arpeggiator output is 1 - 2 - 3 - 2 - 3 - repeat.
Playing and Editing the Arpeggiator
Setting the Advanced Parameters
KOMPLETE KONTROL - Manual - 175