Page 11.1
6280 TRANSPORTATION
UNLOADING
• Position machine at the back of the truck in line with the ramp (See Figure B).
• Carefully move machine onto ramp leaving cutting head down (in contact with ramp surface).
• Even without counterweights machine weighs 250 pounds
• Make sure you have machine under control. Failure to do so could cause machine runaway, damage to
machine, damage to property or cause serious injury.
• Slowly back machine down ramp.
WARNING:
Ramp must have good contact with the back of the vehicle. Failure to do so could
cause ramp to lose contact with back of vehicle resulting in damage to the machine or injury to
the operator.
Figure A
WARNING:
Never load or unload machine on a ramp or incline when wheels are in the
disengage mode. Failure to do so could cause machine runaway, damage to machine, damage to
property or cause serious injury.
CORRECT
INCORRECT
Figure B
