Page 10
6280 TRANSPORTATION
TRANSPORT WHEEL ASSEMBLY
• Transport wheels help to eliminate damage to flooring and
make movement of unit easier.
ATTACHING TRANSPORT WHEELS
• Remove two outside blade cover bolts (See Figure A).
• Tip machine back and block up front of machine so cutting
head has enough clearance for front wheel assembly to fit
under. See Figure B or, lay unit on side and block up (See
Figure C).
• Mount front wheel assembly over blade cover (See Figure
A). Replace two outside blade cover bolts.
• Remove blocks.
• DO NOT leave machine in transport mode while in transit
in vehicle without machine being secured.
REMOVAL OF TRANSPORT WHEELS
• Reverse procedure from above.
#6280-301 Front
Transport Wheel
Figure C
WARNING:
Make sure machine is stable and secure
on blocks.
Figure B
Figure A
WARNING:
Never have transport wheel assembly mounted onto machine or wheels disengaged
when going up or down a loading ramp or incline. (See Page 10.1). Failure to do so could cause
machine runaway, damage to machine, damage to property or cause serious injury.
