2
1.5
Advice for Operators of Grinding Machines
During the operation of the GP30 it may be possible to exceed the acceptable noise
level of 85 dB(A). This is dependent on the different locations and the local circumstances.
When the noise level is 85 dB(A) or more, the machine operator and the persons working near
the machine must wear sound-insulating devices.
1.6
Machine Type Designation
Machine Type:
GP30
Working Width:
30 in (72cm)
Drive: Manual
Grinding Capacity:
Variable
Dust Hose Connection:
3 in (76mm) x 25 ft (8m)
2.0 Safety Instructions
2.1 Explanation of Warnings and Symbols
2.2 Organizational Measures
2.3 Personnel Selection and Qualification
2.4 Safety Precautions Applicable to Different Operating Conditions
2.5 Repair Work, Maintenance Activities, and Default Repair on the Jobsite
2.6 Safety-off Position
2.7 Dangerous Aspects of the Machine
2.8 Electrical Engineering Regulations
2.9 Special Instructions
2.1
Explanation of Warnings and Symbols
The following symbols are used in this manual to highlight areas of particular
importance:
Operational Safety
Safety precautions that are to be taken to ensure prevention of injury.
Safety Goggles / Ear Protection
Information, instructions, and restrictions with regards to possible risks to persons or
extensive material damages.
Electrical Warning
Warning against dangerous voltages.