6
Instruct operators and repair personnel on the following:
• Cleaning and repair work are only allowed if the machine is shut off and in the safety off position.
• Opening or removing safety devices while the machine is running is not allowed.
• Replace all safety covers and devices after cleaning, repair, or maintenance work.
• Do not touch moving parts and do not walk into the working path of the machine.
• Before restarting machine, make sure all personnel are a safe distance away from the work
area after initial start-up.
3.0 General Information
3.1 Operative Range
3.2 Scope of Supply
3.3 Operating Features
3.4 Electric Motor
3.5 Cutting Area
3.6 Couplers & Tool Plates / Stone Holders
3.7 Variable Speed Drive
3.8 Tooling Change
3.9 Care & Maintenance
3.1
Operative Range
The GP30 is a grinding machine with counter rotating heads that is used for preparation and
polishing horizontal surfaces. Grinding the surface according to NFE specifications thoroughly
removes surface contaminants, coats of paint, sealants, and thin coatings.
A suitable dust collection unit must be connected to the machine in order to collect the dust being
produced by the grinding process. The proper dust collection system ensures dust-free operation
of the machine and clean air at the workspace.
3.2
Scope of Supply
Provided with machine:
• GP30
• Manual (1)
3.3
Operating Features
Key Button Controls Start / Stop
Pushing the key button "Start" will turn the controls on and start the motor. Pushing the key button
“Stop” will stop the motor.