Electric Assembly Instructions
1. Line up J-Rails to the Columns and attach using
the M6x12mm Socket head screws provided.
Fig. 1
Fig. 4
Fig. 2
2. Attach the top support to the leg column
using the M6x12mm flat head screws
provided. (Fig. 2)
3. After step 2 is complete, flip the assembly
over onto the bottom side of the table top.
4. Attach the feet to the columns using the
M10x20mm Button Head Screws provided.
While making sure they are pointing the
same way as the top supports. (Fig. 3)
5. Below is a layout of how a proper assembly
should look. (Fig. 4)
PLEASE NOTE:
·
To synchronize the control and motors plug in all of
the control cables, power cable, and the switch.
·
Hold the down button until the unit bottoms out,
you will hear a clicking sound and the columns will
move slightly upward.
·
If you lose power to the unit you will have to
re-synchronize.
REQUIRED TOOLS:
·
#2 Phillips Driver
·
Metric Allen Wrenches
EACH TABLE INCLUDES:
·
Column Kit
·
J-Rail Kit
·
Foot Kit w/ Top Supports
Fig. 3
