3-Leg Assembly Instructions
3 Leg Table Components:
·
(I) LH 90 Degree Adapter
(J) RH 90 Degree Adapter
·
Need a 3
rd
Column to match Crank or Electric.
I
J
1. Attach the 90° or 120° adapters to the 3rd column
by first screwing the M6x12mm Socket Head screws
almost all the way into the motor box, and then
hang the adapter over the screws and finish driving
the screws down. (Fig. 1)
2. Just like with a 2 leg assembly, line up the J-Rails to
the assembly, except this time you will attach them
to the 90° or 120° adapters as shown. (Fig. 2)
3. The 3 Leg Assembly should lay out as shown. (Fig. 3)
The example shown is a 90° 3-Leg Table with T-Feet.
Fig. 2
Fig. 3
90° 3-Leg Assembly
90° Adapters
Fig. 1
I
J
