Crank Assembly Instructions
Crank Handle Assembly is
supposed to line up flush to
the front edge of the table
when compressed.
1. Line up J-Rails to the appropriate Column and
attach using the M6x12mm Socket head screws
provided.
-
Note: The Leg Columns are marked
right and left handed inside the Gear
Box Case. Right hand is marked with a
blue circle and left hand is marked with
a black circle.
Fig. 1
Fig. 4
Fig. 2
2. Insert Hex Rod into the Thru Hole on either
Leg Column (Fig. 2) and slide it through into
the other leg. Center the Hex Rod in the
assembly.
3. After the Hex Rod is in place, attach the top
supports to the appropriate columns with
the M6x12mm Flat Head Screws. (Fig. 3)
4. Carefully flip the table as show in Fig. 4 and
then attach the T-Feet using the M10x20mm
Button Head Screws provided.
REQUIRED TOOLS:
·
#2 Phillips Driver
·
Metric Allen Wrenches
EACH TABLE INCLUDES:
·
Column Kit
·
J-Rail Kit w/ Hex Rod
·
Foot Kit w/ Top Supports
Fig. 3
5. To attach the table top to the assembly;
place the top supports an appropriate distance
from the front of the table top and then center
onto the table top.
Fig. 5
