QUINCY BANQUETTE HARDWARE LIST
24”, 30” & 48” BANQUETTE HARDWARE LIST
60” & 72” BANQUETTE HARDWARE LIST
TOOLS NEEDED
UPHOLSTERED PANEL HARDWARE LIST
(48) #8x1” Round Washer Head Screws
(2) 5/16-18 x 1” Bolt + 5/16-18 Nut (Hex Flange)
(1) 3/4” Spacer Board
(2) 9-1/2”W Back Boards
(2) 7-1/2”W Seat Boards
(2) Seat Brackets
(72) #8x1” Round Washer Head Screws
(3) 5/16-18 x 1” Bolt + 5/16-18 Nut (Hex Flange)
(1) 3/4” Spacer Board
(2) 9-1/2”W Back Boards
(2) 7-1/2”W Seat Boards
(3) Seat Brackets
Tape Measure
Drill
#2 Square Head Bit
2- ½” Open End Wrench
(2) Flat Washers
(2) Thumb Screws
DESIGNED AND BUILT IN MIDDLE AMERICA
®
CROWWORKS.COM
Questions? contact us at [email protected].
UPHOLSTERED PANEL FOR
SEAT AND/OR BACK
DRAWN BY:
DESCRIPTION:
All ideas, designs, planning, drawings, and specifications are owned by, and are the property of Crow Works, and were created and developed for use on, and in connection with the specified project. Under no condition is this drawing or any part of, to be reproduced, used by or disclosed to any person, firm, or corp. without the written consent of Crow Works.
QBH-30
30" QUINCY BOOTH
SHEET NO:
2 OF 4
2
A
SIZE:
1:12
SCALE:
0
REV:
PART NO:
DATE:
DATE:
66.37 LBS
CHECKED BY:
WEIGHT:
