Page 8
HANDLE ASSEMBLY
Handle allows for 7-1/2" of adjustment depending on operator height. Insert handle (See Figure 1) to
desired length and properly tighten both locking "T" bolts (See Figure 2). Plug handle cord into motor
cord (See Figure 3). Make sure both “T” Bolts engage handle at all times.
SET-UP
WARNING:
Handle must be engaged with both securing "T" bolts. Failure to do so could cause
serious injury.
Figure 2
Figure 3
Figure 1
Securing
T-Bolts
Handle
Cord
Motor
Cord