background image

NI WSN-3230/3231 User Guide and Specifications

32

ni.com

Canada

This product complies with Industry Canada RSS-210.

Cet appareil est conforme aux norme RSS210 d’Industrie Canada.

Europe—EU Declaration of Conformity 

Marking by the above CE symbol on the label indicates compliance with the Essential Requirements of 
the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following 
conformance standards: EN 300 893, EN 300 328, EN 301 489-17, EN 60950.

Europe – Restrictions for Use of 2.4 GHz Frequencies in European Community Countries

Japan

The certified radio equipment is embedded in this device.

本機器には認証済み無線設備が内蔵されています

Singapore

België/
Belgique:

For private usage outside buildings across public grounds over less than 300 m no special registration 
with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings 
across public grounds over more than 300 m. For registration and license please contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over afstand kleiner dan 300 m geen registratie 
bij BIPT/IBPT nodig; voor gebruik over afstand groter dan 300 m is wel registratie bij BIPT/IBPT 
nodig. Voor registratie of licentie kunt u contact opnemen met BIPT.

Dans le cas d'une utilisation privée, à l'extérieur d'un bâtiment, au-dessus d'un espace public, aucun 
enregistrement n'est nécessaire pour une distance de moins de 300 m. Pour une distance supérieure à 
300 m un enregistrement auprès de I'IBPT est requise.  Pour les enregistrements et licences, veuillez 
contacter I'IBPT.

Deutschland:

License required for outdoor installations. Check with reseller for procedure to follow.

Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungspflichtig.Bitte mit Händler die 
Vorgehensweise abstimmen.

France:

Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454 MHz respectively) may be used 
outdoors in France.

Bande de fréquence restreinte : seuls les canaux 1- 7 (2400 et 2454 MHz respectivement) doivent être 
utilisés endroits extérieur en France.  Vous pouvez contacter I'Autorité de Régulation des 
Télécommuniations (http://www.art-telecom.fr) pour la procédure à suivre.

Italia:

License required for indoor use. Check with reseller for procedure to follow.

E'necessaria la concessione ministeriale anche per l'uso interno.

Verificare con i rivenditori la procedura da seguire.

Nederland:

License required for outdoor installations. Check with reseller for procedure to follow.

Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste 
procedure.

Complies with
IDA Standards

DA105692

Summary of Contents for WSN-3230




































Reviews: