background image

©

 National Instruments Corporation

11

NI WSN-3230/3231 User Guide and Specifications

Figure 9.  

Integrated Panel Mount Slots

Caution

Disconnect power before removing the device from the panel.

Setting Up the NI WSN-3230/3231 Device

The following sections discuss setting up the NI WSN-3230/3231 for use. 

Installing the Software

For more information about NI-WSN software, go to 

ni.com/info

 and enter 

wsnsoftware

.

You must be an administrator to install NI software and devices on your computer. Before connecting 
the hardware, install the following software in the following order:

1.

NI LabVIEW 2011 or later

2.

NI LabVIEW Real-Time Module 2011 or later (required for NI 9795 and NI 9792 support)

3.

NI-RIO 4.0 or later (required for NI 9795 support)

4.

NI LabVIEW WSN Module 2011 or later, which installs NI-WSN 1.3 or later (required) and 
NI MAX (required)

5.

NI-WSN 1.3 or later (includes NI MAX)

Tip

NI-WSN 1.3 or later and NI MAX are also included on the software installation disc included 

with your NI WSN gateway and are also available for download at 

ni.com/support

.

Note

After installation of NI-WSN, the 

NI Wireless Sensor Network Getting Started Guide

 is 

available from 

Start»All Programs»National Instruments»NI-WSN

.

Summary of Contents for WSN-3230




































Reviews: