manualshive.com logo in svg

National Instruments VXI-SB2020, Getting Started

Share
Download
National Instruments VXI-SB2020 Getting Started Download Page 59

Glossary

© National Instruments Corporation

Glossary-7

VXI-SB2020 and NI-VXI for Solaris

Slot 0 device

A device configured for installation in Slot 0 of a VXIbus mainframe.

This device is unique in the VXIbus system in that it performs the
VMEbus System Controller functions, including clock sourcing and
arbitration for data transfers across the backplane.  Installing such a device
into any other slot can damage the device, the VXIbus backplane, or both.

statically 

A device whose logical address cannot be set through software; that is,

configured device

it is not dynamically configurable.

SYSFAIL

A VMEbus signal that is used by a device to indicate an internal failure.

A failed device asserts this line.

T

trigger

Either TTL or ECL lines used for intermodule communication.

TTL

Transistor-Transistor Logic

V

VDC

volts direct current

victext

Text-based VXI Interactive Control Program, a part of the NI-VXI bus
interface software package.  Used to program VXI devices, and develop
and debug VXI application programs.

VME

Versa Module Eurocard or IEEE 1014

VMEbus System
Controller

See Slot 0 Device.

VXIbus

VMEbus Extensions for Instrumentation

vxiinit

A program in the NI-VXI bus interface software package that
initializes the board interrupts, shared RAM, VXI register
configurations, and bus configurations.  This program must be run at
least once after rebooting your machine to initialize the system.

vxitedit

Text-based VXI Resource Editor program, a part of the NI-VXI bus
interface software package.  Used to configure the system, edit the
manufacturer name and ID numbers, edit the model names of VXI and
non-VXI devices in the system, as well as the system interrupt
configuration information, and display the system configuration
information generated by the Resource Manager.

Summary of Contents for VXI-SB2020





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands