manualshive.com logo in svg

National Instruments VXI-SB2020, Getting Started

Share
Download
National Instruments VXI-SB2020 Getting Started Download Page 35

NI-VXI Software Installation and Configuration

Chapter 3

VXI-SB2020 and NI-VXI for Solaris

3-8

© National Instruments Corporation

Place these lines in your 

.cshrc

 (C shell) or 

.profile

 (Bourne or Korn shells).

Note:

You must run 

vxiinit

 to configure the SB-MXI each time you start up or restart the

computer, or if you have changed the configuration with the 

vxitedit

 program, as

described in the configuration sections of this chapter.

Using LabVIEW or LabWindows/CVI

For information on developing application programs using LabVIEW, refer to the LabVIEW
VXI VI Reference Manual.  To use LabVIEW to program your system, you must have a
LabVIEW for Sun VXI Development System.  Refer to the Optional Software section in
Chapter 1, Introduction.

For information on developing application programs using LabWindows/CVI, refer to the
NI-VXI Software Reference Manual for C.  You can use the functions and the syntax as described
in this software reference manual.  To use LabWindows/CVI to program your system, you must
have a LabWindows/CVI for Sun VXI Development System.  Refer to the Optional Software
section in Chapter 1, Introduction.

Note:

You must have the ANSI C version of the 

libnivxiio.so

 file in the 

/nivxi

directory to run either LabVIEW or LabWindows/CVI.  Do 

NOT

 use the 

K&R C

version of the file.

Configuring the NI-VXI Software

Run the 

vxitedit

 device configuration utility if you need to make any changes to the default

software configuration.  You can also run 

vxitedit

 if you just want to examine the software

configurations.

The following sections describe how to modify and/or view the configuration information for
the SB-MXI board.  To modify or view manufacturer names, model names, or device ID
associations, or to obtain more information on non-VXI devices, refer to the  NI-VXI Text
Utilities Reference Manual.

Default Configurations

The NI-VXI software has factory default configurations.  These default configurations match the
factory default configurations of the hardware interface.

If you do not use 

vxitedit

 to make changes, the default characteristics of the software will

remain in effect.

Summary of Contents for VXI-SB2020





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands