manualshive.com logo in svg

National Instruments VXI-SB2020, Getting Started

Share
Download
National Instruments VXI-SB2020 Getting Started Download Page 58

Glossary

VXI-SB2020 and NI-VXI for Solaris

Glossary-6

© National Instruments Corporation

N

NI-VXI

The National Instruments bus interface software for VME/VXIbus
systems.

Non-Slot 0 device

A device configured for installation in any slot in a VXIbus mainframe
other than Slot 0.  Installing such a device into Slot 0 can damage the
device, the VXIbus backplane, or both.

P

propagation

The transmission of signal through a computer system.

R

Register-Based

A Servant-only device that supports VXIbus configuration registers.

device

Register-Based devices are typically controlled by Message-Based devices
via device-dependent register reads and writes.

resman

The name of the National Instruments Resource Manager in NI-VXI bus
interface software.  See Resource Manager.

Resource Manager

A Message-Based Commander located at Logical Address 0, which
provides configuration management services such as address map
configuration, Commander and Servant mappings, and self-test and
diagnostic management.

RM

See Resource Manager.

S

s

seconds

Servant

A device controlled by a Commander; there are Message-Based and

Register-Based Servants.

shell

An interactive program for commands.

shell script

The commands used to perform batch processing.

slave

A functional part of a MXI/VME/VXIbus device that detects data transfer
cycles initiated by a VMEbus master and responds to the transfers when
the address specifies one of the device's registers.

slave-mode

A device is in slave mode it if is responding to a bus cycle.

operation

Summary of Contents for VXI-SB2020





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands