National Instruments VXI-MXI-Express Series User Manual Download | Manualshive

Page: 6 / 88

background image

Electromagnetic Compatibility Guidelines

This product was tested and complies with the regulatory requirements and limits for electromagnetic
compatibility (EMC) as stated in the product specifications. These requirements and limits are designed to provide
reasonable protection against harmful interference when the product is operated in its intended operational
electromagnetic environment.
This product is intended for use in industrial locations. There is no guarantee that harmful interference will not
occur in a particular installation, when the product is connected to a test object, or if the product is used in
residential areas. To minimize the potential for the product to cause interference to radio and television reception
or to experience unacceptable performance degradation, install and use this product in strict accordance with the
instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National Instruments could
void your authority to operate it under your local regulatory rules.

Caution

To ensure the specified EMC performance, operate this product only with shielded cables and

accessories.

«
...
4
5
6
7
8
...
»

Summary of Contents for VXI-MXI-Express Series

























































































Reviews:

No comments

Related manuals for VXI-MXI-Express Series

Brand: Particle Pages: 6

Brand: Abus Pages: 12

Brand: Bang & Olufsen Pages: 80

Brand: Bang & Olufsen Pages: 13

Brand: Quectel Pages: 95

Brand: ICAS Pages: 51

Brand: Icar Pages: 40

Brand: Icar Pages: 86

Brand: Icar Pages: 39

Brand: IBP Pages: 12

Brand: Icom Pages: 30

Brand: ICM Controls Pages: 2

Brand: ICM Controls Pages: 2

Brand: ray Pages: 11

Brand: OJ Electronics Pages: 8

Brand: OJ Electronics Pages: 112

Brand: OJ Pages: 17

Brand: CAME Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands