![background image](http://html.mh-extra.com/html/national-instruments/tbx-1303/tbx-1303_manual_710237007.webp)
TBX-1303 32-Channel Isothermal Terminal Block
6
ni.com
Figure 3.
Completed Installation
Rack Mounting
When you complete the installation, you can mount the TBX assembly on
the rack. If you are using the NI TBX rack-mount assembly, refer to the
TBX Rack-Mount Installation Guide
, which you can download from
ni.com/manuals
, for instructions. If you are not using this rack-mount
assembly, complete the following steps to mount the TBX assembly
directly onto the DIN rail.
1.
Snap the TBX terminal block onto the DIN rail with a firm push.
2.
Install the SCXI chassis using the appropriate chassis rack-mount kit.
Note
To remove the TBX terminal block from the DIN rail, place a flathead screwdriver
into the slot above the terminal block base, and pry it from the rail.