Index
©
National Instruments Corporation
I-3
problem-solving and diagnostic resources,
online, C-1
PXI combination chassis, 1-5 to 1-6
Q
questions and answers, B-1 to B-4
R
random scanning. See multiplexed scanning.
rear signal connector (figure), 2-7
removing SCXI-1530/1531, 1-12 to 1-14
from Measurement & Automation
Explorer, 1-14
from SCXI chassis, 1-12 to 1-13
S
safety information, 1-14 to 1-15
safety specifications, A-4
sample-and-hold circuitry
SCXI-1530/1531 signal conditioning, 2-2
specifications for simultaneous sample
and hold, A-3
track-and-hold vs. sample-and hold, B-1
scan clock, B-4
scan rate determination, 2-5 to 2-6, B-4
SCXI channel string. See also multiplexed
scanning.
defined, 2-8
LabVIEW channel scanning, 2-8 to 2-9
SCXI chassis
connecting SCXI-1530/1531 to DAQ
device, 1-4 to 1-5
installing SCXI-1530/1531, 1-2 to 1-4
removing SCXI-1530/1531, 1-12 to 1-13
SCXI-1200, using with SCXI-1530/1531
module, B-2
SCXI-1530/1531
accelerometer design, 2-1 to 2-2
block diagram, 2-3
calibration, 2-13 to 2-14
common questions, B-1 to B-4
configuration and self-test, 1-7 to 1-12
digital signals (table), B-3
installation, 1-2 to 1-7
multiplexed scanning, 2-6 to 2-11
overview, 1-1
parallel mode operation, 2-11 to 2-13
safety information, 1-14 to 1-15
signal conditioning, 2-2 to 2-3
signal connections, 2-3 to 2-6
specifications, A-1 to A-4
self-test verification, 1-11
troubleshooting, 1-11 to 1-12
signal conditioning, 2-2 to 2-3
signal connections, 2-3 to 2-6
accelerometer connections, 2-4 to 2-6
BNC connector assignments (figure), 2-4
current excitation, 2-5
determining scan rate, 2-5 to 2-6
digital signals (table), B-3
floating (non-referenced) transducer, 2-5
ground-referenced transducer, 2-5
rear signal connector (figure), 2-7
software
application development environments
supported, 1-1
installation, 1-1 to 1-2
NI-DAQ version required, B-2
software-related resources, C-2
specifications
environment, A-3
inputs, A-1
outputs, A-1
physical, A-3
safety, A-4
simultaneous sample and hold, A-3
transfer characteristics, A-2 to A-3