Appendix B
Common Questions
B-2
www.ni.com
Which version of the NI-DAQ driver software is needed in order to use
the SCXI-1530/1531?
NI-DAQ version 6.7 or later is required for the SCXI-1530/1531.
How do I obtain the most current version of NI-DAQ?
Visit
ni.com
and follow the link, Download Software»Drivers and
Updates»Search Drivers and Updates, and type in the keyword
NI-DAQ
to find the latest version of NI-DAQ for your operating system.
Can I use the SCXI-1530/1531 with a version of NI-DAQ that works
under the Macintosh Operating System (MacOS)?
At the time this manual was printed, no.
I have gone over the
in Chapter 1,
Configuring the SCXI-1530/1531
, yet I still cannot correctly test and
verify that my SCXI-1530/1531 is working. What should I do now?
Unfortunately, there always exists the chance that something is not
operating correctly in your system, or the combination of the components
in your system is not operating correctly together. You may have to call or
e-mail a technical support representative.
The technical support representative will often suggest additional
troubleshooting measures to try in order to isolate the problem. If
requesting technical support by phone, have your system near at hand so
that you can try these measures immediately. National Instruments contact
information is listed in Appendix C,
How do I configure an SCXI-1200 for use with an SCXI-1530/1531
module?
When using the SCXI-1200 with the SCXI-1530/1531, make sure the
SCXI-1200 is configured for NRSE mode in the Measurement &
Automation Explorer.
Can the SCXI-1530/1531 be configured and used in parallel mode?
Yes.