![background image](http://html1.mh-extra.com/html/national-instruments/scxi-1314t/scxi-1314t_installation-manual_3503957015.webp)
©
National Instruments Corporation
15
SCXI-1314T TEDS Bridge Sensor Terminal Block
•
Connect the conduit cable shielding to the metal thumbscrew of
the SCXI module with a grounding wire as shown in Figure 11.
Figure 11.
Connect the Shielding to the SCXI Module Using the Thumbscrew
9.
After you have grounded your application, insert the RJ-50 (10p10c)
modular plugs into the SCXI-1314T.
Note
Improperly grounding the shielding causes signal noise.
10. Refer to the
SCXI Quick Start Guide
to power on the SCXI chassis and
configure the system in software.
1
Conduit Cable Insulation
2
Grounding Strap Wire
3
SCXI Module
4
Thumbscrew
5
SCXI-1314T
6
RJ-50 (10p10c) Modular Plug
7
Twisted Pair Cable
8
Cable Shielding
NI SCXI-1314T
CH0
CH1
CH2
CH3
CH4
CH5
CH6
CH7
1
2
3
4
5
6
7
8