Quick Start Guide
GETTING STARTED
Set up your Desk/5000 in a convenient location close to a
power source and an Ethernet socket or telephone socket.
To connect an Ethernet cable, connect one side to your
Ethernet output or router and the other side to the ‘ETH’ socket
on the Magic box.
Note
: If you connect both the telephone and Ethernet cables,
the Ethernet (broadband) connection will be used in
preference. The telephone connection may be used as a
backup. It is recommended that the terminal is not connected
to a phone line with call barring, call waiting or alarm enabled.
Finally, connect the power supply unit into the power socket on
your magic box and to the mains power. After a short
initialisation process, the terminal will display READY or an
idle logo.
SUPERVISOR PASSWORD
The default supervisor password is 01483.
Please note
: The
terminal will require you to change this to a new code of your
choosing before you can process any transactions.
FUNCTION KEYS
Function Keys
: These appear on the Touchscreen interface
when they may be used as shortcuts, or as Arrow Keys (F2
and F3 only).
Menu key
: To enter the application menus press the Menu
key from the idle (READY) screen. Pressing the key again
moves to the next menu (if available).
Correction keys
: When entering numbers or letters, the
yellow ‘Clear’ key deletes one character at a time; while the
red ‘Cancel’ key deletes the entire line (this key also cancels
transactions).
Confirmation key
: The green ‘Enter’ key is used to confirm
anything that has been typed into the terminal.
Paper feed key
: To test the feeding of the paper through the
printer press and hold the paper feed key.
Note
: Press and hold the
yellow key and the dot
key together to turn the
terminal off.
Desk/5000
Clear key
Cancel key
Menu key
Enter key
Virtual Function Keys
(Touchscreen)
Paper feed key
Telephone
Power In
Ethernet
Connecting the Desk/5000 magic box
to power and communication cables
