©
National Instruments Corporation
9
SCXI-1303 Installation Guide
Figure 4 shows the SCXI-1303 signal connections.
Figure 4.
SCXI-1303 Signal Connections
Installation
To connect the terminal block to the SCXI module front connector, perform
the following steps:
1.
Connect the module front connector to its mating connector on the
terminal block.
2.
Tighten the top and bottom thumbscrews on the back of the terminal
block to hold it securely in place.
Note
For accurate cold-junction compensation, place the SCXI chassis away from an
extreme temperature differential.
1
Screw Terminals
2
Bias Resistor Networks
3
Pullup Resistor Networks
4
Product Name, Assembly
Number, Revision Letter, and
Serial Number.
2
3
1
4
- Pin 1
Summary of Contents for SCXI-1303
Page 11: ......