![background image](http://html1.mh-extra.com/html/national-instruments/scxi-1112/scxi-1112_user-manual_3544744042.webp)
Index
I-2
www.natinst.com
L
LabVIEW software, 1-2
LabWindows/CVI software, 1-2
M
manual. See documentation.
manually adding modules, 2-4 to 2-5
MCH0+ signal (table), 3-5
MCH0- signal (table), 3-5
Measurement & Automation Explorer
auto-detecting modules, 2-4
configuration procedure, 2-5
manually adding modules, 2-4 to 2-5
overview of configuration procedure, 2-3
removing modules, 2-8 to 2-9
N
National Instruments application software, 1-2
National Instruments Web support, B-1 to B-2
NI-DAQ driver software, 1-3
O
online problem-solving and diagnostic
resources, B-1
operation of SCXI-1112. See theory of
operation.
P
physical specifications, A-3
power requirement specifications, A-4
problem-solving and diagnostic resources,
online, B-1
R
rear signal connector, 3-4 to 3-6
digital I/O signal connections, 3-6
pin assignments (figure), 3-4
pin descriptions (table), 3-5
SCXIbus to SCXI-1112 module rear
signal connector to DAQ device pin
equivalencies (table), 3-6
registers in digital control circuitry, 4-2
removing
modules from Measurement &
Automation Explorer, 2-8 to 2-9
SCXI-1112 from SCXI chassis, 2-7 to 2-8
requirements for getting started, 1-1 to 1-2
S
SCANCLK signal (table), 3-5, 3-6
SCXI-1112 module. See also theory of
operation.
block diagram, 4-1
configuration and self-test, 2-2 to 2-7
installation, 2-1 to 2-2
overview, 1-1
removing from SCXI chassis, 2-7 to 2-8
requirements for getting started, 1-1 to 1-2
SCXIbus to SCXI-1112 module rear
signal connector to DAQ device pin
equivalencies (table), 3-6
software programming choices, 1-2 to 1-3
SCXIbus connector and SCXIbus
interface, 4-2
SCXIbus to SCXI-1112 module rear signal
connector to DAQ device pin equivalencies
(table), 3-6
self-test verification, 2-6
troubleshooting, 2-6 to 2-7
SERCLK signal (table), 3-5, 3-6
SERDATIN signal (table), 3-5, 3-6
SERDATOUT signal (table), 3-5, 3-6