![background image](http://html1.mh-extra.com/html/national-instruments/scxi-1112/scxi-1112_user-manual_3544744012.webp)
Chapter 2
SCXI-1112 Module Installation
2-2
www.natinst.com
4.
Rotate the thumbscrews clockwise to fasten the front of the
SCXI-1112 module to the top and bottom threaded strips of your SCXI
chassis.
5.
If this module is to be connected to an MIO DAQ device, insert the
metal cable adapter of the SCXI-1349 cable assembly to the rear signal
connector on the SCXI-1112 module. Fasten the metal cable adapter to
the rear threaded strip using the screws. Attach the loose end of the
cable to the MIO DAQ device.
Note
Consult your cable assembly installation guide for more information.
6.
Make sure the cable assembly is securely fastened at both ends.
7.
Turn on the SCXI chassis.
8.
Turn on the computer or reconnect it to your chassis.
Figure 2-1.
Installing the SCXI-1112
The SCXI-1112 module is installed. You are now ready to configure your
module using Measurement & Automation Explorer.
1
Cable
2
Thumbscrews
3
SCXI-1112 Module
4
Chassis
®
MAINFRAME
SCXI
3
4
2
1