![background image](http://html1.mh-extra.com/html/national-instruments/scc-do01/scc-do01_user-manual_3704611004.webp)
©
National Instruments Corporation
3
SCC-DO01 Isolated Digital Output Module User Guide
Device Specific Information
Note
For general SCC module installation and signal connection information, and
information about the SC-2350 carrier, refer to the
SCC Quick Start Guide
, available
for download at
ni.com/manuals
.
Installing the Module
Caution
Refer to the
Read Me First: Safety and Radio-Frequency Interference
document
before removing equipment covers or connecting/disconnecting any signal wires.
Plug the SCC-DO01 into any digital input/output (P0.) socket J(
X
+
9),
where
X
is 0 to 7, on the SC-2345. When you configure the SC-2345
according to the procedure in the
SCC Quick Start Guide
, the SC-2345
routes the output signal from digital line P0.(
X
) on the E Series DAQ
device.
Connecting Loads to the SCC-DO01
Note
The signal names have changed. Refer to
ni.com/info
and enter
rdtntg
to
confirm the signal names.
Figure 1 and Figure 2 show two ways to connect a load and an external
voltage supply to the SCC-DO01. These configurations have different
electrical characteristics, as described in the
Specifications
section.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com