Table 9. Priorities of the Error Messages
Message
Priority
CTRL
1 (Highest priority)
BUS
2
PF
3
PW
4 (Lowest priority)
User Error Codes
Code
(hex)
Additional code
Meaning
Remedy
903
—
Memory problem (e.g., buffer too
small)
Reduce the amount of
data.
904
—
Inconsistent parameters
Check the parameters.
905
—
Invalid parameters
Check the parameters.
908
Code of failed
service
Maximum number of permitted
parallel services exceeded
(Processing conflict)
Wait for the service
called previously to be
completed, and then try
again.
090A
Value transmitted in
Parameter_Count
The number of parameters is
inconsistent with the service. The
Parameter_Count parameter does
not agree with the number of
subsequent words.
Match the number of
parameters.
913
Code of failed
service
The service called is not
supported.
Use a service that is
supported.
917
Code of failed
service
Service decoding failed.
Restart the device.
Contact NI if the
problem persists.
918
Code of the
unknown service
Call of an unknown service code.
Check the call.
928
—
An exclusive service was to be
executed without the appropriate
rights.
Wait for the exclusive
rights to be enabled.
12
|
ni.com
|
REM-11180 User Manual