National Instruments PXIe-4339, User Manual And Specifications

Page: 1 / 36

USER GUIDE AND TERMINAL BLOCK
SPECIFICATIONS
NI PXIe-4339 and RM-4339
NI PXIe-4339, 8 Ch, 24-Bit, Bridge and Voltage Input Module,
RM-4339 Rack-Mount Terminal Block
This document explains how to install, configure, and set up the NI PXIe-4339 SC Express
universal bridge module and RM-4339 rack-mount terminal block. Driver support for the
NI PXIe-4339 was first available in NI-DAQmx 14.2. Driver support for the RM-4339 was first
available in NI-DAQmx 14.5. For the list of devices supported by a specific release, refer to the
NI-DAQmx Readme
, available on the version-specific download page or installation media.
Note
The keying of these terminal blocks prevents them from connecting to other
modules that could be damaged by the voltage present on the terminal block.
However, you should only use these terminal blocks with their supported modules.
Contents
Electromagnetic Compatibility Guidelines .............................................................................. 2
What You Need to Get Started ................................................................................................. 3
Installation ................................................................................................................................ 4
Install the Software........................................................................................................... 4
Unpack and Install the Module......................................................................................... 4
Unpack and Install the Rack-Mount Terminal Block, Chassis, and Cables..................... 6
RM-4339 Positions ................................................................................................................... 10
Shared Resources.............................................................................................................. 10
CAL IN ..................................................................................................................... 11
CAL BIAS ................................................................................................................ 11
In-Situ Calibration .................................................................................................... 11
EXT PWR................................................................................................................. 13
Excitation/External Power........................................................................................ 13
Position Resources............................................................................................................ 14
RJ50 .......................................................................................................................... 14
Status LED................................................................................................................ 15
PFI0 .......................................................................................................................... 15
External Shunt .......................................................................................................... 16
AO 0..7 ..................................................................................................................... 18
Position Switching.................................................................................................... 19