6
|
ni.com
|
NI PXIe-4339 and RM-4339 User Guide and Terminal Block Specifications
Unpack and Install the Rack-Mount Terminal Block,
Chassis, and Cables
Remove the packaging and inspect the terminal block, chassis, and cables. Contact NI if there is
any damage. Do not install a damaged product.
Caution
The module and terminal block are static sensitive. Always properly
ground yourself and the equipment when handling or connecting to the module and
terminal block.
Caution
Refer to the
Read Me First: Safety and Electromagnetic Compatibility
document before removing equipment covers or connecting or disconnecting any
signal wires.
Caution
Do not supply hazardous voltages (>30 V
rms
/42.4 V
pk
/60 VDC) to the
terminal block.
Caution
To ensure the EMC performance specified for the connected
NI PXIe-4339 module, operate this product only with shielded RJ50 and BNC cables.
Note
The chassis can be powered on or off when connecting the terminal block.
To install the rack-mount terminal block into the rack, complete the following steps while
referring to Figure 3.
1.
Place the RM-4339 in the desired position.
2.
Install and tighten the four rack-mounting screws.
