National Instruments PXIe-4339, User Manual And Specifications

Page: 3 / 36

NI PXIe-4339 and RM-4339 User Guide and Terminal Block Specifications | © National Instruments | 3
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
What You Need to Get Started
To set up and use the RM-4339 rack-mount terminal block with the NI PXIe-4339 module, you
need the following items:
•
Hardware
–
RM-4339 rack-mount terminal block
– NI PXIe-4339 module
– PXIe chassis
– SCAL-4339 Shunt Calibration Accessory (optional)
– 19 in. rack to accommodate the RM-4339 and PXIe chassis
– Four screws (not supplied by NI) suitable for your application to mount the RM-4339
in the rack
– SH96-96-2 cable and included standoffs, which are used to mount the cable to the
module
– Rack-mount kit (as required for your application) for mounting the PXIe chassis in the
19 in. rack
– Cabling and sensors as required for your application
• Tools
–
Phillips-head screwdrivers as required by your application
– Flathead screwdrivers as required by your application
– Long-nose pliers
– Wire cutter
– Wire insulation stripper
– RJ50 terminal crimper
• Documentation
–
NI PXIe-4339 and RM-4339 User Guide and Terminal Block Specifications
–
Read Me First: Safety and Electromagnetic Compatibility
–
NI PXIe-4339 User Manual
– PXIe chassis user manual
You can download needed documents from
ni.com/manuals
.