Index
©
National Instruments Corporation
I-3
Getting Started with Your PCI/PXI-6810 SDA
N
numerically controlled oscillator (NCO), 3-2
P
PCI/PXI-6810
hardware description, 1-1 to 1-2
optional equipment, 1-8
requirements for getting started, 1-5
software description, 1-3
software programming choices, 1-6 to 1-7
driver software, 1-6 to 1-7
National Instruments application
software, 1-6
unpacking, 1-8
using with CompactPCI, 1-4 to 1-5
J2 pin assignments (table), 1-5
physical specifications, A-5
pin assignments
I/O connector (figure), 4-2
J2 connector (table), 1-5
power, external. See external power.
power requirement specifications, A-5
power switch, low-voltage, 2-1 to 2-2
PCI/PXI-6810 configurable switch
(figure), 2-1
PCI/PXI-6810 switch settings
(figure), 2-2
PXI Specification, 1-4
R
RD<0..1> signal (table), 4-3
receiver transceiver specifications, A-2
requirements for getting started, 1-5
RS-232 transceivers
overview, 3-3
specifications, A-2
RS-485 transceivers
overview, 3-3
specifications, A-3
RTS<0..1> signal (table), 4-3
run-time-only environment, installing, 2-3
RX_TX_<0+..0-> signal (table), 4-3
RX_TX_<1+..1-> signal (table), 4-3
S
serial channel triggering specifications, A-4
Serial Data Analyzer instrument driver
compatibility with application
software, 1-3
software description, 1-6 to 1-7
serial data processor, 3-3
signal connections, 4-1 to 4-4
I/O connector
pin assignments (figure), 4-2
signal descriptions (table), 4-3 to 4-4
using external power with DIO
signals, 4-4
Soft Front Panel application, 2-6 to 2-7
getting help, 2-7
illustration, 2-6
selecting configuration, 2-7
starting, 2-6
testing configuration, 2-7
software description
electronic documentation, 1-3
instrument driver, 1-3
utilities and applications, 1-3
software installation, 2-2 to 2-3
development environment, 2-2
run-time-only environment, 2-3
software programming choices, 1-6 to 1-7
driver software, 1-6 to 1-7
National Instruments application
software, 1-6
specifications
clock, A-1
external clock, A-1
internal clock, A-1