background image

©

 National Instruments Corporation

G-1

Measurement Studio User Manual

Glossary

A

ActiveX

Set of Microsoft technologies for reusable software components. Formerly 
called OLE.

ActiveX control

Reusable software component that adds functionality to any ActiveX 
control container through exposed properties, methods, and events. The 
Measurement Studio data acquisition, user interface, and analysis controls 
are examples of ActiveX controls.

ActiveX control 
container

Development environment that fully supports ActiveX controls and 
integrates them into its own environment using COM. An ActiveX control 
container enables you to specify how ActiveX controls interact with the 
environment through environment properties. Visual Basic is an example of 
an ActiveX control container.

analog I/O

Reading or writing data in continuously variable physical quantities, such 
as voltage or current.

annotate

Adding text, arrows, or shapes to describe or highlight a point or region on 
a graph.

ANSI C

C programming language defined by the American National Standards 
Institute.

API

Application Programming Interface. A specification of software functions 
and their input and return parameters.

array control

An array of Measurement Studio user interface controls that behave as a 
single unit.

assembly

A collection of one or more files that are versioned and deployed as a unit. 
An assembly is the primary building block of a .NET Framework 
application. All managed types and resources are contained within an 
assembly and are marked either as accessible only within the assembly or 
as accessible from code in other assemblies.

asynchronous

Function that begins an operation and returns control to the program prior 
to the completion or termination of the operation.

Summary of Contents for none




















































































































































































Reviews: