Chapter 1
Introduction to Measurement Studio
©
National Instruments Corporation
1-5
Measurement Studio User Manual
To install support for NI-DAQmx:
1.
In the NI Measurement Studio 8.5 installer, enable the
VS2008 Driver
Support».NET Framework 3.5 Languages Support for
NI-DAQmx
feature.
2.
In the NI Device Drivers installer, enable the
Data Acquisition»
NI-DAQmx
feature.
To install support for NI-VISA:
1.
In the NI Measurement Studio 8.5 installer, enable the
VS2008 Driver
Support».NET Framework 3.5 Languages Support for NI-VISA
feature. If you want to use the Instrument I/O Assistant inside Visual
Studio 2008, enable the
VS2008 Driver Support»VS2008 DotNET
IIOAssistant Support
feature.
2.
In the NI Device Drivers installer, enable the
Instrument Control»
NI-VISA
feature.
To install support for NI-488.2:
1.
In the NI Measurement Studio 8.5 installer, enable the
VS2008 Driver
Support».NET Framework 3.5 Languages Support for NI-488.2
feature.
2.
In the NI Device Drivers installer, enable the
Instrument Control»
NI-488.2
feature.
To install support for MAX:
1.
In the NI Measurement Studio 8.5 installer, enable the
VS2008 Driver
Support».NET Framework 3.5 Languages Support for NI MAX
feature.
2.
In the NI Device Drivers installer, enable the
NI Measurement and
Automation Explorer
feature.
Installing Hardware Drivers for Visual Studio 2005 Support
The .NET and C++ class libraries for Visual Studio 2005 support for
National Instruments hardware drivers are included in the Driver CD
installer.