![background image](http://html2.mh-extra.com/html/national-instruments/ni/ni_getting-started-manual_3462317017.webp)
©
National Instruments Corporation
17
NI Digital Waveform Generator/Analyzer Guide
Figure 8.
NI SHB 12X-H3X24 Flying Lead Cable
Creating a Custom Accessory
Many common NI digital waveform generator/analyzer applications may
require you to create a custom accessory to easily access the signals of your
DUT. If you are creating a custom accessory to use with a device with a
VHDCI DDC connector, you can purchase the mating connector for the
VHDCI cable from NI (part number 778914-01). For more information about
creating these custom accessories, refer to the
Interfacing to the NI Digital
Waveform Generator/Analyzer using the VHDCI Connector
application
note, available by entering
rdinwa
in the text field at
ni.com/info
. If you
are designing a custom accessory to use with a device that uses an Infiniband
connector, you can also purchase this connector (part number 779157-01).
Refer to
Appendix A: Device Front Panels
for descriptions of the signals and
pinout diagrams.
1
Leads (1 x 3 Header Receptacle)
2
12x Infiniband Connector
3
Removeable Sleeving
1
2
3