©
National Instruments Corporation
13
NI-DAQmx for NI WLS/ENET-9163 Getting Started Guide
For information about sensors, go to
ni.com/sensors
, or refer to the
Common
Sensors
topic in the
NI-DAQmx Help
. For information about IEEE 1451.4 TEDS
smart sensors, go to
ni.com/teds
. If you are using LabVIEW SignalExpress,
refer to
Step 8. Use NI-DAQmx with Your Application Software
Step 7. Run Test Panels
Complete the following steps to use the MAX test panel.
1. In MAX, expand
Devices and Interfaces»Network Devices
.
2. Right-click your device, and select
Test Panels
to open a test panel for the
selected device.
3. Click the tabs at the top and
Start
to test the device functions, or
Help
for
operating instructions.
If the test panel displays an error message, refer to
ni.com/support
.
4. Click
Close
to exit the test panel.
ni.com/manuals
Refer to the device documentation (user guide) for your C Series
I/O module.
*
From the Connection Diagram tab in the DAQ Assistant, you can view and print a
connection diagram for tasks and virtual channels in your system. Refer to the
DAQ Getting
Started
guides for more information about using the DAQ Assistant.
Location
How to Access Pinout