National Instruments NI WLS-9000 Series, Getting Started Manual, Page: 11 / 16

© National Instruments Corporation 11 NI-DAQmx for NI WLS/ENET-9163 Getting Started Guide
Note
If after clicking Save Settings your device becomes unresponsive,
press the RESET button on the NI WLS/ENET-9000 Series device for
five seconds to return the device user configuration to the factory
defaults and reconnect the Ethernet cable. Refer to the
Troubleshooting
Device Connectivity section for more network connection tips.
• Wired Configuration —To use your NI WLS/ENET-9000 Series device with
an Ethernet cable, select the Wired Configuration tab (for NI WLS-9000
Series devices) or the Configuration tab (for NI ENET-9000 Series devices)
and complete the following steps.
a. Select DHCP + Link-Local , DHCP , Static , or Link-Local from the
Obtain IP Address Through pull-down menu.
If you selected DHCP from the Obtain IP Address Through pull-down
menu, the IP Address, Subnet Mask, Gateway, DNS Server fields are
automatically populated after you save your settings. Otherwise, ask your
network administrator for the correct settings.
b. Click Save Settings . The Apply Changes? alert opens. Click OK .
For more information about MAX configuration, refer to the NI-DAQmx Help ,
accessible from Start»All Programs»National Instruments»NI-DAQ .