Chapter 1
Installing and Configuring the SCXI-1129
1-10
ni.com
4.
Connect the HV8-BAN4 cable from the DMM to the HVAB connector
behind slot 12.
5.
Connect the SH9MD-9MD cable from the DMM to the AUX IN
connector behind slot 5.
6.
You can install any additional SCXI-1129 modules in any slot that has
an HVAB-backplane adapter behind it.
Notes
Do not connect the SH9MD-9MD cable to the AUX IN connector behind slot 4 on
the 2-slot HVAB-backplane adapter.
An SCXI-1129 is required in slot 12 to establish communications with the chassis. If slot
12 is empty, the system will not operate. It is this module that you must specify in MAX as
the cabled module to the DMM.
Connecting the SCXI-1129 to the DMM in a Multichassis System
The following sections describe how to configure the following
multichassis configurations:
•
4-slot and 4-slot multichassis configuration
•
4-slot and 12-slot multichassis configuration
•
12-slot and 12-slot multichassis configuration
You can also create larger configurations.
4-Slot and 4-Slot Multichassis Configuration
In addition to the items needed for a single chassis system, you need the
following to install this configuration:
•
SCXI-1357 multichassis expansion kit
–
HV8-HV8 cable
–
SH9MD-9MD cable
–
Two 8-position HVAB plugs
–
One 2-slot HVAB-backplane adapter
–
Two 1-slot HVAB-backplane adapters
Summary of Contents for NI SCXI-1336
Page 1: ...SCXI 1336...
