©
National Instruments Corporation
3
NI PXIe-1062Q Power Supply Shuttle User Guide
Figure 1.
Rear View of the NI PXIe-1062Q Chassis
Installation and Maintenance
The information in this section is for qualified service personnel only. Read
the
Read Me First: Safety and Radio-Frequency Interference
document
included with your kit before using the power supply shuttle.
Caution
Many components within the NI PXIe-1062Q chassis under repair are susceptible
to static discharge damage. Service the chassis only in a static-free environment. Observe
standard handling precautions for static-sensitive devices while servicing the chassis.
Always wear a grounded wrist strap, or equivalent, while servicing the chassis.
Caution
Always disconnect the AC power cable before cleaning or servicing the chassis.
1
Power Supply Shuttle
2
Push-Reset Circuit Breaker
3
Universal AC Input
4
Chassis Ground Screw
5
10 MHz REF OUT BNC
6
10 MHz REF IN BNC
7
Remote Inhibit and Voltage Monitoring Connector
8
Air Filter Retainer
9
Air Filter Retainer Screw
10 Power Supply Shuttle ID Label
11 Fan Speed Selector Switch
12 Inhibit Mode Selector Switch
13 Power Supply Shuttle Handle (2x)
14 Power Supply Shuttle Mounting Screws (8x)
2
3
9
7
14
13
1
8
5
6
4
10
11
12
