manualshive.com logo in svg

National Instruments NI PXI/e-4000 Series, User Manual, Page: 14 / 20

Share
Download
National Instruments NI PXI/e-4000 Series User Manual Download Page 14

3.

Pull the captive screws to unseat the module and slowly slide the module along the guides.

4.

Replace the filler panel in the empty slot.

5.

Store the module in an antistatic protective bag.

Figure 8.  

Removing NI PXIe-4304/4305 Modules

Create a Simulated Device

To run examples without the hardware installed, use an NI-DAQmx simulated device. To create 
a simulated device in MAX:
1.

Launch MAX.

2.

Right click 

Devices and Interfaces»Create New

.

3.

From the dialog, select 

Simulated NI-DAQmx Device or Modular Instrument

.

4.

Type 

4304

 or 

4305

 in the text box at the top of the window.

5.

Select the device from the list provided.

6.

Click 

OK

.

More Information

After you install NI-DAQmx, the NI-DAQmx documentation is available from 

Start»All 

Programs»National Instruments»NI-DAQmx

. Additional resources are online at 

ni.com/gettingstarted

.

1

Captive Screws (Use to remove modules.)

2

Front Panel (Do not use to remove modules.)

NI P

XIe-

1062Q

CO

OLING

 CL

EA

RA

NC

E A

ND 

FAN 

FIL

TE

R MAI

NT

ENA

NC

E RE

QUI

RE

D. 

S

EE 

MA

NUAL

.

2

1

Datasheet

Sales:

 

+44 (0) 1273 570 220   

Website:

 www.amplicon.com   

Email:

 [email protected]

       IT and Instrumentation for industry

 Amplicon.com

Summary of Contents for NI PXI/e-4000 Series





















Reviews:

No comments