b.
With the latch release raised, grasp the terminal block and pull it away from the
module.
Figure 7.
Removing the TB-4304 from the NI PXIe-4304/4305 Module
3.
Store the terminal block in an antistatic protective bag.
Module Removal
Caution
Do
not
remove a module with the power on. Doing so can damage the
module.
To remove the module, refer to Figure 8 while completing the following steps:
Note
To maintain forced air cooling in the PXI Express system, refer to the
Maintain Forced-Air Cooling Note to Users
.
1.
Make sure that the chassis is powered off before removing the module.
2.
Loosen the captive screws on the top and bottom of the module.
Caution
Do
not
pull the front panel to remove the module. Doing so may cause
module components to come into contact with adjacent modules, causing damage to
the modules.
1
Mounting Screw
2
Latch Release
3
PXI Express Controller
4
PXI Express Chassis
5
TB-4304 Terminal Block
NI
PXI
e-10
62Q
5
1
2
CO
OLING CLE
ARA
NCE
AND F
AN FIL
TE
R M
AINTE
NA
NCE
RE
QUIRE
D.
S
EE
M
ANU
AL.
COOLI
NG CLEARA
NCE A
ND F
AN FIL
TER MAINTEN
ANCE
REQ
UIRED
.
S
EE
MANU
AL.
3
4
Datasheet
Sales:
+44 (0) 1273 570 220
Website:
www.amplicon.com
Email:
IT and Instrumentation for industry
Amplicon.com